Keto Mojo Meter: A Step-By-Step Guide To Testing

The Keto-Mojo meter is a blood ketone and glucose testing kit that helps you manage your ketosis and diabetes by testing for ketosis and blood sugar levels. The kit includes a meter, lancing device, lancets, and test strips. To test your ketone levels, insert a fresh ketone strip into the meter and prick your fingertip using the lancing device to get a blood droplet. Bring the tip of the strip to the droplet, and it will draw in the blood. You will get your result in a few minutes. The Keto-Mojo meter also has a free smartphone app that syncs your readings and tracks your ketones and glucose.

Inserting a fresh, unused strip

To insert a fresh, unused strip into your Keto-Mojo meter, start by making sure the strip is pushed all the way down in the port. The meter will automatically turn on when a strip is placed in the meter. Ensure the strip is facing up. With the strip colour (blue or brown) facing you, insert the electrode end into the top of the meter. You’ll see the blood channel (a little runway) on the top of each strip when they are the right way up.

Do not touch the top of the strip where the blood will be absorbed, as this may contaminate the sample and give an inaccurate reading.

After inserting the strip, wait for the meter to display a flashing droplet icon on the right-hand side of the meter screen. The meter will display the droplet icon above an image of the strip. The icon will flash on the meter screen, which means the strip is now ready to accept your blood sample.

It is important to only use Keto-Mojo strips with your Keto-Mojo meter to ensure the accuracy of your results.

Pricking your fingertip

Before you begin, it's crucial to prepare your hands to avoid contaminated test results. Wash your hands with warm water and dry them thoroughly. Alternatively, you can use an alcohol swab to sterilize the specific part of your fingertip that you'll be pricking. Warm hands result in better blood flow, so you can also rub or massage the area to be pricked.

Now, let's move on to the lancing device. First, twist off the top of the device. Insert a new lancet into it, then press down firmly on the expansion gap. Twist off the plastic lancet cap and place the device cover over the lancet.

The lancing device has a depth selector with five settings, allowing you to adjust the depth of the lancet's pierce. Choose the depth that suits your skin type. For average skin, it's recommended to start with the middle setting (number 3).

Once your lancing device is ready, it's time to prick your fingertip. Always use a freshly cleaned and dry area of your fingertip. Test on the side of your finger where the skin is softer, and the prick is less painful. For individuals with calloused hands, it's best to use the ring or pinky finger. If you test regularly, remember to alternate fingers for comfort.

After pricking your finger, wipe away the first blood droplet with a clean paper towel or tissue. This step ensures more accurate results by avoiding excessive interstitial fluid (the substance just below the skin) in the first droplet. Please note that you should not use tissues with lotion or aloe.

Finally, apply gentle pressure to help form a blood droplet. Avoid excessively squeezing your finger, as it can increase interstitial fluid and affect the accuracy of your results. If you're having difficulty forming a blood droplet, try lowering your hand below hip height and gently squeezing your finger, starting from the part closest to your palm and working your way down.

Remember, it's important to follow all testing procedures carefully to ensure accurate results and to avoid any issues with your Keto-Mojo meter.

Applying blood to the test strip

To apply blood to the test strip, follow these steps:

Firstly, make sure your hands are clean, as the new GK+ meter is very sensitive to microscopic contaminants on the hands. Wipe away the first droplet of blood.

Now, prick a freshly cleaned and dry area of your fingertip using the included lancing device. Ensure you get a blood droplet about half the size of a matchstick head. You have 3 minutes to get a reading before the meter will shut off, so work quickly but carefully.

With the strip still in the meter, gently touch the end of the strip to your blood droplet so that it travels up the channel freely. Do not push the strip into your finger, as this will stop the flow of blood. Wait for the meter to start counting down before moving the strip from the blood droplet.

If you pull your finger away before the meter begins counting down, try again with a new strip and don't pull your finger away until the meter begins counting down.

Using the lancing device

The lancing device is an essential component of the Keto-Mojo meter kit, used to prick your fingertip and draw a blood sample for ketone and glucose testing. Here is a detailed, step-by-step guide on how to use the lancing device effectively:

Preparing the Lancing Device:

• Before using the lancing device, ensure that you have properly inserted a fresh lancet into the device. Refer to the instructions provided with your Keto-Mojo meter for guidance on lancet insertion.
• Adjust the depth setting on the lancing device to suit your preferences. The depth setting determines how deeply the lancet will prick your fingertip. If you are new to lancing, start with a shallower depth setting and adjust as needed.
• Wash your hands thoroughly with soap and water to ensure that the area is clean and free from contaminants. Dry your hands completely before proceeding.
• Identify a suitable area on your fingertip to prick. It is recommended to use the side of your fingertip, as this area is less sensitive. Avoid using the pad of your finger, as it contains more nerve endings.
• Hold the lancing device firmly against the chosen area on your fingertip. If your hands are steady, you may perform this step without assistance. However, if you feel more comfortable, you can rest your hand on a stable surface to ensure precision.
• Press the button or release mechanism on the lancing device to activate the lancet. This will cause the lancet to prick your fingertip quickly and painlessly.
• Gently squeeze or massage your finger to encourage a droplet of blood to form. The ideal size of the blood droplet is about half the size of a matchstick head.
• It is important to act quickly, as you only have three minutes to obtain a blood sample before the Keto-Mojo meter shuts off.

Tips for Effective Lancing:

• Always use a new, sterile lancet for each test. Do not reuse lancets to prevent contamination and ensure accurate results.
• Avoid lancing the same finger repeatedly. Allow your fingertips to heal between tests by rotating the fingers you lance.
• If you have difficulty obtaining a blood sample, try warming your hands before lancing. Cold hands may reduce blood flow, making it harder to draw blood.
• Ensure that the first drop of blood is wiped away, as it may contain contaminants that can affect the accuracy of your readings.

By following these instructions, you will be able to use the lancing device skillfully and obtain the blood samples necessary for accurate ketone and glucose testing with your Keto-Mojo meter.

Getting a reading

To get a reading on your Keto-Mojo meter, you must first insert a fresh, unused ketone or glucose strip (depending on what you want to test) into the meter. The meter will then check ("CH") until the code displayed matches the number on the vial of strips, and the droplet icon is flashing.

Next, use the included lancing device to prick a freshly cleaned and dry area of your fingertip. Ensure you get a blood droplet about half the size of a matchstick head. You have three minutes to get a reading before the meter will shut off.

With the strip still in the meter, bring the tip of the strip to the droplet on your finger. On contact, the strip will draw in the blood via capillary action. Wait for the meter to start counting down before moving the strip from the blood droplet, and then wait for the meter to give you your result.

Frequently asked questions