Using Keto Mojo Control Solution: A Step-By-Step Guide

Control solutions are used to test the accuracy of your Keto-Mojo meter. While the Keto-Mojo manual suggests testing with control solutions, it is not necessary as all Keto-Mojo meters are calibrated for control before they leave the factory. However, if you suspect your meter is damaged or not giving you accurate readings, you may want to perform a control test. To perform a control test, you will need your meter, an unused test strip, and the control solution. After inserting a test strip into the meter, shake the control solution vial thoroughly, and squeeze out a drop of the solution onto the tip of the vial cap. Then, gently move the tip of the test strip to the control solution droplet and hold it there until the strip fills completely and the meter begins to count down. Compare this result with the range printed on the side of your strip box to determine if your meter is working properly.

Control solutions test the accuracy of your meter

Control solutions are an effective way to test the accuracy of your meter. They contain a known amount of β-Ketone or Glucose that can react with Keto-Mojo test strips. This way, you can check if your meter and test strips are reading blood sugar levels properly by providing the expected result.

The control solution test can be performed when:

• You suspect that your meter or strips are not working properly.
• Your test results are unexpectedly too high or low, or do not match how you’re feeling.
• Your meter or strips have been exposed to extreme environmental conditions, like humidity, temperature, or sunlight.
• You are advised by a healthcare professional to do so.

Step 1: Insert a new test strip into your meter and check that the meter is ready to perform a test.

Step 2: Shake the control solution bottle vigorously.

Step 3: Discard the first drop and wipe off the bottle tip so that it is clean.

Step 4: Dispense a second drop onto a hard, clean surface, then bring the test strip to the drop. Hold the test strip up to the sample until enough control solution has been applied to the test strip.

Step 5: Check the meter as it calculates and displays the test result. Compare the test result to the appropriate control solution range printed on the test strip vial.

Step 6: Dispose of any used test strips and store the control solution bottle with your testing supplies.

It is important to note that control solutions have a shelf life of 12-18 months or 90 days from when they are first opened, whichever is sooner. Therefore, always check the expiration date before performing a control solution test.

You don't need to test your meter every week

Control solutions are a way to test your meter to ensure it is giving you accurate results. Although control solutions are provided in your Keto-Mojo meter kit, these meters rarely fall out of calibration. Therefore, contrary to what the manual says, you don't need to test your meter every week.

Keto-Mojo meters are calibrated for control before they leave the factory, so you don't have to worry about their accuracy. If you suspect your meter is giving you inaccurate readings outside the accepted variance, contact customer support. They will help you get to the bottom of the problem and determine if you are eligible for a replacement.

If you want to perform a control test, you can purchase control solutions on the Keto-Mojo website. To avoid contamination, do not apply the control solution directly from the bottle onto a strip. Instead, squeeze a drop of the solution onto the tip of the vial cap, wipe it off, and then squeeze out another drop. With the strip in the meter, gently touch the tip of the test strip to the control solution droplet and hold it there until the strip fills completely and the meter begins to count down.

Perform a control test if your meter has been damaged

If your Keto-Mojo meter has been damaged, you may need to perform a control test to ensure it is still giving accurate results. Control solutions are a way to test your meter, although it's rare for a Keto-Mojo meter to fall out of calibration.

To perform a control test, first, make sure you have your meter, an unused test strip, and the control solution. Insert a glucose or ketone test strip to turn on your meter. Wait for the meter to display the flashing blood droplet. Shake the control solution vial thoroughly. Squeeze out a drop of solution onto the tip of the vial cap and wipe it off. Then squeeze out another drop onto the tip of the vial cap. With the strip in the meter, gently move the tip of the test strip to the control solution droplet and hold it there until the strip fills completely and the meter begins to count down.

To avoid contaminating the control solution, do not apply it directly from the bottle onto a strip. Your device will tag this measurement as a QC test automatically. After counting down, the meter will display the test result. Compare this result with the range printed on the side of your strip box. If the results fall within the range, your meter is working properly. If not, read the instructions again and repeat the control solution test. If the results are still outside of the range, contact customer support.

Control solutions have a shelf life of 12-18 months

Control solutions are an important way to test the accuracy of your meter. They have a specific shelf life, and understanding this timeframe is crucial for ensuring the reliability of your readings.

Keto-Mojo control solutions typically have a shelf life of 12 to 18 months when unopened. This expiration date is clearly printed on the bottle for your convenience. However, once the bottle is opened, the solution will only remain usable for 90 days or 6 months, depending on the source of information. Therefore, it is essential to mark the date of opening your control solution to ensure you stay within this timeframe.

The shelf life of the control solution is an important consideration when performing a control test. Before using the control solution, it is recommended to double-check the expiration date to ensure it is still within the usable timeframe. This proactive check can prevent inaccurate readings and potential issues.

Additionally, it is important to note that control solutions are not included in your Keto-Mojo kit. While the manual may suggest weekly testing, it is not necessary as the meters rarely fall out of calibration. However, if you suspect any issues with your meter or strips, or if your meter has been damaged, a control test can be performed by purchasing a control solution separately.

Compare your control test result with the range on the test strip box

Once you have performed a control test, you will need to compare your control test result with the range printed on the test strip box or label. If you are using the strips that came with your meter, the range is found on the bottom of the meter box. If you have purchased additional strips, the range is found on the strip packaging.

If you have misplaced the box with the control range listed, you can find the control solution range on a metallic grey sticker on the outside of your meter box or on the outside of your strip box. If you no longer have the box, you can look up the control solution range using the LOT number of your strips. The glucose lot number will differ from the ketone lot number, and you will get the control range for both Level 2 and Level 3 solutions.

If your control test result is out of range, there are a number of steps you can take to troubleshoot the issue. First, check the expiration dates and discard dates of the test strip and control solution. Make sure that the control solution bottle has not been opened for more than 6 months and confirm that the temperature at which you are testing is within the correct range. Ensure that the control solution bottle has been tightly capped, and that the test strip was used immediately after removing it from the foil pouch. Check that the control solution was mixed well and confirm that you are using Keto-Mojo brand control solution. Finally, make sure that you followed the test procedure correctly.

If you have checked all of these conditions and your results are still out of the range indicated on the test strip box or label, your meter or test strips may not be working properly. Do not use the system to test blood. Please contact Keto-Mojo customer support for further assistance. You may be eligible for a replacement.

Frequently asked questions